Our Faux Panels are only 4 lbs each or 0.5 lbs per square ft.
Q:
Are the panels easy to install?
A:
Yes, our paneling and siding is very easy to install. Please click for the installation directions. If you are not handy, any carpenter in the phone book can install our panels.
Barron Designs Inc. (dba FauxPanels.com) warrantees all Faux panels to withstand normal outdoor conditions for fifteen years. Barron Designs (dba FauxPanels.com) warrantees the Faux Panels will not peel, crack, split, or rot.
Barron Designs (dba FauxPanels.com) warrantees against all manufactures defects (Barron Designs must be notified within 30 days of purchase if a manufacture defects was found. Damage resulting from accident, alteration, misuse, abuse, fire, improper installation, improper maintenance, acts of God, or use of products not approved by Barron Designs Inc shall not be covered under the warrantee. Barron Designs Faux Panels are treated with a coating of a U.V. finish. This prevents and/or slows down sun fading, but like anything left in the sun, some slight fading could occur. Barron Designs does not warranty against this sun fading.
When Barron Designs has determined that a Faux Panel is defective, it will replace the product or a credit may be offered instead of replacement (at Barron Designs' discretion). Barron Designs' liability is limited to the cost of the defective product.
This warranty expressly excludes the following:
Harmful chemicals
Misuse or abuse
Fire or flood
Vandalism
Distorting and warping from excessive heat
Mold and Mildew accumulation
Damage from shipping and Handling
Lightning, hurricane, tornado, windstorm, earthquake, or any other acts of god
Animal or birds
Color changes due to normal weathering including sunlight
Falling objects or impact of foreign objects
Damage from improper installation
Q:
What are the dimensions of the corners and columns
A:
Please click on an image below to enlarge.
Column dimensions
Corner Dimensions
Stone Corner Dimensions
Q:
How do I cut the panels?
A:
Cutting the panels is easy! You can use any wood cutting tool.
Please click on the images below to see a short video of the panels being cut.
Although our panels are incredibly realistic, keep in mind that they are not a stone product, they are manufactured utilizing high density polyurethane. With that in mind, all of our Polyurethane Panels can be used around a Fireplace opening/insert, and/or Stove, provided you follow the Fireplace Insert/Stove Manufacturer's specifications for required clearances.
When using our panels around an open hearth where there will be a “live flame” (i.e., wood, coal, etc.), it is recommended that you use some type of a stone or non flammable border (minimum 6”) before starting our Panels, and then use Class A fire rated panels for the area immediately surrounding the opening. Please note that anytime our panels are used and there is any chance of a live flame or embers coming in contact with the panel, that we recommend using a Class A fire rating. Also, please note that a Class A fire rating makes the panels more fire and heat retardant, it does not make them fire proof. Other than this, our standard panels can be utilized with the same clearances observed as the Fireplace/Stove manufacturer recommends for any standard paneling material or sheetrock. You also must adhere to any, and all, building and/or fire codes concerning clearances that are applicable in your area.
Everyone has the same reaction when they see our Faux Panels for the first time. They have to actually pick up a panel see how light it is. Shocked, surprised and delighted. They can't believe it's not real. The Faux Panels are indistinguishable from real brick, stone and wood products.
All our panels vary in weight between all the product lines we are offering. Most of the panels are only 1 to 1.5 lbs per sq ft. Please click on the product line your interested in to see the weight.
Q:
Are the panels easy to install?
A:
Yes, our paneling and siding is very easy to install. Please click for the installation directions. If you are not handy, any carpenter in the phone book can install our panels.
Q:
Can the panels be used as flooring?
A:
No, the Faux Panels™ are not intended for foot traffic. They are to be used on walls and ceilings only.
Anywhere you want the look of brick, stone, bamboo or wood. The panels are perfect for inside or outside in any residential or commercial application.
Q:
Is there any maintenance needed?
A:
After the paneling is installed, no maintenance is required!
Q:
What sizes do panels come in?
A:
Please click on the product line you are interested in to learn more. Most of our panels are 24" x 48".
Q:
Can your Faux Panels™ be used outside?
A:
YES! Our Faux Panels™ were specially formulated to resist moisture, sun fading, insects and pests. Click here to see installation examples of wood, brick and stone panels.
Q:
Can I attach your panels to concrete?
A:
Yes, the panels are glued to cement with Construction adhesive.You can also use "Tap Con" masonry screws in each corner of the panel. The Caulking we provide will hide the screw heads. This is a very common application.
Q:
What are they made of?
A:
A very durable, high-density polymer.
Q:
What do the panels feel like? Do they feel like real brick?
A:
The panels are molded from real brick, stone, wood, etc. Therefore, they feel just like the real thing.
Q:
Are the samples rebatable?
A:
Yes, the samples are fully rebatable. Only one coupon per order may be used.
Q:
How do I cash in my sample order rebate?
A:
We will include a coupon for you to use on your next online order.
The coupon will have a code for you to use for your next order in your shopping cart.
In order for you to use coupon, your order subtotal must be greater than coupon amount.
Q:
If I am a builder, designer or architect can I get a discount?
A:
We do offer a volume discount on large orders to the trades.
Q:
How do I place an order?
A:
Simply hit the Add to cart button in our online store. You products will be stored in your Shopping cart. Hit the Proceed to Check out button when you are ready to check out and pay for your items.
Q:
Can I use your faux stone panels as a skirting around my house?
A:
Yes, Our faux panels™ install fast and are durable.
Click on the images below to enlarge.
Q:
What countries do you ship to?
A:
We ship to all countries. If you live outside United States or Canada, please contact us for more information.
Q:
How do the Faux Panels™ ship?
A:
All of our Faux Panels™ ship UPS directly to you (or your job site). Shipping is an additional cost.
YES, no need to worry. These panels are perfect for all climates. They're impervious to sun fading, water, animal or insect attacks. Our UV prohibiters will protect the finish, even for exterior use. You can read the test reports here.
Q:
How do I clean the Faux Panels™?
A:
Cleaning the panels is easy. For exterior applications, simply rinse them down with a garden hose. For interior applications, you can wash them with soap and water or a mild detergent.
Q:
Are catalogs of your Faux Panels™ available?
A:
Not yet. Soon we will have a catalog that can be purchased online.
No, you are in our online showroom. To keep the cost down to you, we can only be found online. Everything we sell is factory direct.
You won't be able to find this product in any stores. Please feel free to order samples from our website.
Q:
Are you running any promotions?
A:
Yes, we are offering $100, no questions asked, to anyone who sends us pictures of the installed product (if we choose to use the pictures on our portfolio).
Q:
Can I use your Faux Stone Panels in my shower?
A:
Yes, our panels are completely water proof and durable.
When cleaning, please use only a mild detergent and make sure not to use any harsh or bleach-based cleaners. The panels can be sealed in with a polyurethane sealer for easier cleaning if needed.
Q:
What do the edges look like?
A:
The edges are finished in the same color as the panel.
About 20% less than all other similar types masonry products.
Q:
How do I know how much caulking to use?
A:
It is recommended to order 1 tube per 4 panels.
Q:
How light are they?
A:
All our panels vary in weight between all the product lines we are offering. Most of the panels are only 1 to 1.5 lbs per sq ft. Please click on the product line your interested in to see the weight.
Q:
What sizes are the Carlton panels?
A:
The Stone panels measure 30" x 48" (10 sq. ft.). The Brick panels measure 22" x 58" (approx. 8 sq. ft.)
Q:
Can your Faux Panels be used outside?
A:
YES! Our Faux Panels™ were specially formulated to resist moisture, sun fading, insects and pests. Click here to see our portfolio of wood, brick and stone panels.
Q:
Can I use the Carlton Faux Panels™ on a curved surface?
A:
Yes, our Carlton panels do have some flex to them. The maximum deflection is 4" (per 4 foot panel). They can be bent either convex or concave.
We highly recommend that you first put the Faux Panels™ in a warm room for at least an hour before you try to bend them. The warmth will help relax the panels and make them bend easier.
Q:
What are they made of?
A:
A very durable, high-density polymer.
Q:
What do the panels feel like? Do they feel like real brick?
A:
The panels are molded from real brick, stone, wood, etc. Therefore, the feel just like the real thing.
Oxford Panels
Oxford Panels
Frequently Asked Questions
